share Image
  • Electronic Fluorescent Ballast
  • Type High Frequency
  • Starting Type Programmed
  • Circuit Type Normal Output, HPF
  • Lamp Type F28T5
  • Number of Lamps 2
  • Lamp Wattage 28 W
  • Input Voltage 120 to 277 V
  • Input Current 0.59 Ampere at 120 V, 0.23 Ampere at 277 V
  • Input Power 63 W at 120 V, 62 W at 277 V
  • Frequency Rating 50/60 HZ
  • Power Factor 0.98
  • Ballast Factor 1.03
  • Maximum THD 10 Percent
  • Wiring Series
  • Minimum Starting Temperature -18 Deg C
  • Size 9.5 Inch L x 1.3 Inch W x 1 Inch H
  • Approval UL, CSA
  • Includes N Can
  • Housing Material Metal
  • Ignition Time 1.5 Sec
  • Lamp Current Crest Factor 1.7
  • Ballast Efficacy Factor 1.62
  • Wire Striplength 0.375/0.5 MM
  • Wire Type Solid
  • Wire Size 18 AWG
  • Maximum Distance Ballast to Lamp 20 Ft (Remote), 10 Ft (Tandem/Through)

Features / Benefits

  • A Ballast Subjected to Higher than Nominal Voltages will Typically Operate at Increased Temperatures
  • This will Result in Reduced Ballast Life
  • Low Voltage Can Cause Premature Lamp Failures as Well as Unreliable Lamp Starting
  • All Ballasts Are Designed for Single Frequency Operation
  • The Choice of Fluorescent Lamp Ballast Should be Made on the Basis of Selecting the One Rated Quietest for a Specific Location or Interior as Some Ballast have a More Discernable Hum Due to Basic Construction Features and Electrical Ratings
Philips Advance Centium ballasts for T5 lamps at 120-277V are now available with our industry leading N-can at 9.5" x 1.3" x 1.0" or T-can at 14.17" x 1.18" x 1.06", which provides fixture manufacturers increased versatility in their newer generation fixture designs. These ballasts are compatible with all major energy-saving T5 linear lamps and have a variety of other features which makes them ideal for a variety of applications. The ballasts' programmed start ignition provides extended lamp life in frequent switching applications such as those where occupancy sensors are being used. They also feature lamp End-Of-Life (EOL) protection circuitry which safely removes power from the lamp at the end of lamp life."

ICN2S28N35I 28 W, 120 to 277 VAC, 0.23 to 0.59 A, 1.03 Ballast Factor, 2-Lamp, F28T5, Normal Output, HPF, Programmed, High Frequency, N Can, Electronic Fluorescent Ballast

$33.60 / EA
Availability: 10 EA
  Philips Lighting
By placing an order you agree to Terms & Conditions
More Information
Commodity Level DescripElectronic Linear Fluorescent Ballasts
ManufacturerPhilips Lighting
Commodity CodeElectronic Linear Fluorescent Ballasts
Starting TypeProgrammed
Minimum Starting Temperature-18 Deg C
Input Voltage120 to 277 V
Number of Lamps2
Maximum THD10 Percent
ApprovalUL, CSA
Size9.5 Inch L x 1.3 Inch W x 1 Inch H
Frequency Rating50/60 Hz
Additional InfoIncludes N Can; Housing Material Metal; Ignition Time 1.5 Sec; Lamp Current Crest Factor 1.7; Ballast Efficacy Factor 1.62; Wire Striplength 0.375/0.5 MM; Wire Type Solid; Wire Size 18 AWG; Maximum Distance Ballast to Lamp 20 Ft (Remote), 10 Ft (Tandem/Through)
Add SpecAdd Spec
Catalog PagesCatalog Pages
install instinstall inst
Specification SheetSpecification Sheet
Spec URLSpec URL
Weight0.85 lbs
Related Products